| MACHINE MODEL |
C 551SSA Fully Automatic Double Ends Crimping Unit |
| OUTER DIMENSIONS |
W1,090 mm×780 mm,H 1550 mm |
| WEIGHT |
421 Kg |
| POWER SUPPLY |
Single phase AC200-240V 50/60Hz |
| AIR SUPPLY |
(Nl/min 0.5Mpa) 15.7 L/MIN |
| POWER CONSUMPTION |
270 W At Rest 891 W Max |
| APPLICABLE WIRE DIAMETER |
AWG#12 ~ 32 (dependent on wire type) |
| APPLICABLE WIRE TYPE |
AV, AVS,AVSS,CAVUS,KV,KIV,UL,IV,Teflon wire, Glass wire etc.. |
| CRIMPING UNIT |
2.5 ton |
| Crimp Terminal |
Open barrel continuous terminal ( left to right side feed, end feed), Flag terminal |
| Crimp Capacity |
2.5 ton |
| Stroke |
30 mm or 40 mm |
| Type |
Geared 3 phase induction motor |
| Stripping Length Side 1 |
0.1 – 30 mm |
| Rear Stripping Length Side 2 |
0.1 – 20 mm |
| Minimum Processing Dimensions |
L1≧44mm (25mm)  |
| Maximum Cutting Length |
99,999mm (Approx. 100m) |
| Cutting Tolerance |
within ±(0.2+0.02xL)mm L = cutting length |
