| MODEL | C300A | ||||||
|---|---|---|---|---|---|---|---|
| OUTER DIMENSIONS | W370mm ×D370mm ×H296mm | ||||||
| WEIGHT | 24kg | ||||||
| POWER SUPPLY | AC100V～AC240V（Single phase）50Hz/60Hz | ||||||
| POWER CONSUMPTION（100V） | 33W（Rated）182W（Max） | ||||||
| CUTTING LENGTH | 0.1mm～99,999mm | ||||||
| CUTTING TOLERANCES | ±（ 0.1＋0.0005×L ）mm※2 L:indicates a cutting length. | ||||||
| STRIPPING LENGTH |
|
||||||
| APPLICABLE WIRES |
|
||||||
| WIRE FEED SPEED | Variable | ||||||
| CUTTER MATERIAL | Ultra fine particle alloy | ||||||
| DRIVE SUPPLY | Stepping pulse motor |
| Total Length | Pieces |
|---|---|
| 100mm | 5,200 |
| 200mm | 4,650 |
| 300mm | 4,230 |
| 500mm | 3,600 |
| 800mm | 2,900 |
| 1000mm | 2,550 |
| 1500mm | 2,000 |
| 2000mm | 1,700 |
| Both ends stripping | 3mm |
| Setting of speed | 9 |
| Core diameter | 0.6mm |
| Program | A201 |
| Thin wire mode | |
Just set up CC-100 on the left side of the CASTING series, it carries the finished wires by belt-conveyor and neatly deposits those wires on the tray. It contributes to improving the work efficiency rate.
| MODEL | CC-100 |
|---|---|
| OUTER DIMENSIONS | W1200mm ×D340mm ×H135mm |
| WEIGHT（NET） | 10kg |
| POWER SUPPLY | AC100VorAC200V（single phase）50Hz/60Hz |
| POWER CONSUMPTION | MAX15W（AC100V） |
| O.D. SIZE | φ1mm Minimum※ |
| DRIVE/td> | φ1mm Minimum※ |
| Air cylinder |