casting-img

CASTING

Such thick wires have been processed by hand in the field such as cubicle, elevator, power plants where they handle high voltage electrical power lines. KODERA’S delicate technique and adventurous idea have accomplished a special machine for very large wires in diameter.

Specification

MODEL C378
OUTER DIMENSIONS W1,005mm ×D670mm ×H1,360mm
WEIGHT 590kg
POWER SUPPLY AC100V～AC240V（single phase）50Hz/60Hz
POWER CONSUMPTION（100V） 92W（Rated）560W（Max）
AIR SUPPLY 5Nℓ/min 0.5MPa※1
CUTTING LENGTH 180mm～99,999mm
CUTTING TOLERANCES ±（ 0.1＋0.0005×L ）mm※2 L : indicates a cutting length.
STRIPPING LENGTH
FRONT END : 0.1～160mm
REAR END : 0.1～200mm
APPLICABLE WIRES
TYPE Battery cable, W1, W2, VSF, IV, KV, UL, Teflon , Glass Wire, etc
SIZE 200sq～AWG#2（30sq）※2
O.D. Max φ35mm※2
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
DRIVE SUPPLY Stepping pulse motor / Air cylinder

Processing capacity (Actual data)
Number of processed wires per hour


Total Length Pieces Processing speed：9
500mm 257
1000mm 257
2000mm 212

Processing conditions

Both ends stripping 20mm
Setting of speed 9
Wire WL1 38sq

SAMPLE